All About Norma Journal

How do you take off the tint of your back window

Aug 8


It's not just you who's ever thought about how to remove the tint on your rear windows. This article will show you how to remove unwanted tint from your rear windows , without affecting the appearance of your car. If you've got a scratched window or a cloudy tint, it's possible to eliminate it. Be sure to use a heat gun, Trash bags, or Acetone and follow the directions carefully.

Heat gun

Applying heat to your back window tint may be a hassle. However, you can get rid of the tint using a heating gun on a cold day. Hold the heat gun 6 inches from the tint, and then take the film off. Be careful not to overheat the film as excessive heat could cause damage to the glass panel. Make use of a new blade that has an edge that is straight to cut the film.

It is also possible to apply the professional-grade cleaner WD40. Simply spray the WD40 onto the window, rub it off using a rag and then clean the window. ATR adhesive remover is also an excellent choice. This solution will get rid of any glue residue left after the application of the WD40. When using the heating gun, ensure to follow the instructions. Once you've removed any tint, your window will be clear.


There are two ways to remove the tint on your rear windows. The first option is using soapy water. You could also apply alcohol or a heated gun to break up the glue that tints. This process takes up to a few hours to dry. Therefore, you will need to apply soap water each 20 minutes. Once the window is cleaned and dried, you can wipe it clean using an acetone-soaked towel.

Another approach is to apply nail polish remover to the glass. This technique is proven to work well for removing adhesive residue. It's not very effective for removal of tint. Instead, try using microfiber cloths to get rid of any excess glue. Additionally, if you are using nail polish remover, it is possible to also make use of a bucket full of soapy water hot to clean the glass. This technique can help get any remaining adhesive off of the back window.


Make a plastic bag and spray water on it. Place a tarp over the rear deck to catch the water that will spill out. Spray a solution of ammonia/water onto the tint. Then, place the bag of plastic over the window, and then wait for about 30 minutes for the ammonia to absorb. The tint can be removed remnants with a scraper made of non-metal when it is dry.

Use steel wool to scrub off any remaining film of tint. Also, you can employ ammonia or commercial glass cleaner. Be sure to wear safety gear and avoid putting your eyes to the chemical. A hairdryer could also be used to stop the lines from being scraped. Be cautious when applying of ammonia since it can cause damage to your vehicle's interior. It is also recommended to wash the glass with care afterward.

Trash bags

To take off the tint from the back of your window, you can make use of a plastic bag, a thick black garbage bag, or a similar material. The bag should be large enough to cover the whole window. Spray the water onto the window and then place the bag on top of tinted glasses. It is important to cover the entire window and that it touches the tint. If it is extremely difficult to clean the tint, you can use an tarp or a plastic bag.

To get rid of tint on windows, you can employ the heat gun. The hot gun will swiftly dry out the window tint and make it a more efficient alternative to the sun. To stop the tint from drying out, ensure that you mist it with water. Make sure that the tint is removed completely before you move onto the next step. Once you have taken away the tint it is possible to apply another tint.

Rear defroster wires

You're not the only one who has put tint on the back of your windows without removing the grid of the defroster. It's a common mistake among new tint installers. You don't know how to properly remove the defroster grid and risk damaging the rear defroster in your vehicle. These are some tips to help you remove the tint properly.

Before beginning, take measurements of the rear window to determine the amount of film you'll require. Remember to measure both the sides and the bottom. Also, you should remove any air bubbles from the window that could cause wrinkles on the tint film. If you're installing the tint film yourself, be sure you follow the instructions of the manufacturer carefully. If you're working with an expert, make sure to test it to make sure it's correctly installed. Once you've completed this, proceed with the installation.

Phone +18474292479
408 Brook St, Elgin, IL 60120